Setting up Raspberry Pi 5 with latest Rachel Pi image

[Jeremy_Schwartz]

you can still login via the command line and use rsync commands:

Adding a module to RACHEL-Pi

Thanks, Nicole. This is a pretty technical process, and you can easily damage your Pi if you are not careful, but here are the instructions: SSH into your RACHEL-Pi Your RACHEL-Pi is network installed in one of two ways, either as a stand-alone server (with a wifi dongle) or plugged into a router. Based on this configuration, it will either have a self-assigned IP address (10.10.10.10 with dongle) or one assigned by a router via DHCP (192.168.x.xxx). This guide assumes you can find this I…